HOME AUDIO
Luxury music & home entertainment systems.
X-Series ยท Bookshelf Loudspeaker
X1
Bookshelf Loudspeaker
Bookshelf Loudspeaker
Description
Design philosophy
Every decision is acoustic.
The X1 begins with a question: what does this driver pair need from its cabinet, its crossover, and its port geometry to perform at its absolute limit? Every dimension follows from that question. Every component value. Every surface decision.
The result is a loudspeaker with a coherent point of view โ one where cabinet volume, baffle geometry, crossover topology, and driver integration are resolved as a single acoustic problem, not assembled from independent solutions. This is the discipline that separates a loudspeaker system from a collection of parts.
The result is a loudspeaker with a coherent point of view โ one where cabinet volume, baffle geometry, crossover topology, and driver integration are resolved as a single acoustic problem, not assembled from independent solutions. This is the discipline that separates a loudspeaker system from a collection of parts.
Transducer platform
One material. Two transducers. Total coherence.
The X1 uses two transducers from the SATORI reference driver family โ chosen because their mechanical and acoustic properties demanded the least compromise in designing this system. Both use TeXtremeยฎ as the sole diaphragm material: a spread-tow carbon composite developed for Formula 1 and aerospace, selected here for its exceptional stiffness-to-mass ratio, controlled breakup behaviour, and tonal consistency across the operating range.
A single material across both drivers is a deliberate system decision. It gives the X1 a coherent character from deep bass through to the upper treble โ the kind of tonal unity that is difficult to achieve when different diaphragm materials meet at the crossover point.
A single material across both drivers is a deliberate system decision. It gives the X1 a coherent character from deep bass through to the upper treble โ the kind of tonal unity that is difficult to achieve when different diaphragm materials meet at the crossover point.
Tweeter โ high-frequency transducer
29mm TeXtremeยฎ dome, waveguide-loaded
A spread-tow carbon composite dome, driven by a neodymium motor system with dual copper caps that hold voice coil inductance to 0.02 mH โ near-zero variation across the operating band. The integrated cast aluminum waveguide is structural, not decorative: it controls directivity above the crossover point, ensuring that the power response in the room remains consistent rather than narrowing on-axis. The resonance frequency of 635 Hz places the driver's mechanical limit well below any operating stress at the crossover point.
Midwoofer
6ยฝโณ TeXtremeยฎ cone, long-excursion
A woven spread-tow carbon cone combining the two properties that most directly govern midrange resolution and transient accuracy: high rigidity and low moving mass. The neodymium motor uses an extended copper sleeve on the pole piece to suppress inductance modulation across the excursion range โ reducing dynamic compression and preserving detail at all output levels. A vented cast aluminum chassis manages thermal loading and eliminates internal airflow coloration. Free air resonance of 29 Hz allows the driver genuine authority in the bass register within V&Y's reflex alignment.
TeXtremeยฎ
TeXtremeยฎ is a spread-tow carbon fiber material developed for aerospace and Formula 1 applications. Where conventional woven carbon creates undulation as fibers cross over one another โ introducing resonance modes into the diaphragm โ spread-tow weave flattens each tow into a thin tape before weaving, virtually eliminating undulation. The result is a stiffer, lighter diaphragm with a higher pistonic operating range and lower distortion at breakup. Both drivers in the X1 use TeXtremeยฎ as their sole diaphragm material โ a choice that gives the system acoustic coherence from 29 Hz to 30 kHz.
Signal integration
The crossover is where the speaker is truly designed.
Exceptional transducers are the starting point. The crossover is where a loudspeaker system is actually resolved โ where the acoustic, electrical, and mechanical behaviour of each driver is brought into a coherent whole.
The X1 crossover is designed around the precise properties of this driver configuration. The waveguide-loaded TW29 tweeter presents a fundamentally different impedance curve, off-axis behaviour, and sensitivity offset from standard dome variants. The network accounts for these properties explicitly: impedance linearisation topology across the full frequency range; parallel LCR networks that suppress driver breakup resonances without compromising transient integrity; and phase-aligned integration at the ~2,200 Hz crossover point.
A single series inductor in the low-frequency path preserves the midwoofer's natural transient character. The tweeter network is optimised for controlled directivity through and above the crossover region โ ensuring that what the listener hears off-axis is not a degraded version of the on-axis response, but a consistent acoustic image. The X1 is designed to sound like itself in any room, not only in an anechoic chamber.
Cabinet design
Precision has a geometry.
The X1 cabinet is V&Y's own design โ not adapted, not inherited. Internal geometry, baffle proportions, port architecture, and bracing topology are derived from the acoustic requirements of this specific driver pair in this specific alignment. The cabinet is the last variable in the system equation, resolved only when every other parameter is fixed.
Surface
Multi-stage hand-applied finish
Each cabinet passes through a controlled multi-stage coating process. Coats are flat-sanded between applications and inspected under raking light. The cabinet leaves our facility only when it meets our written surface specification โ not a judgment call, a standard. Available in Gloss Black, Gloss White, Satin Black, and Satin White.
Baffle
Diffraction-controlled baffle geometry
Baffle edge profile is shaped to suppress high-frequency diffraction โ the reflections from cabinet boundaries that broaden the acoustic image and introduce tonal coloration in square-edged designs. Driver placement is calculated against baffle dimensions to displace diffraction artefacts outside the critical listening band, preserving imaging focus and tonal neutrality at the listening position.
Bass loading
Boundary-stabilised reflex alignment
Down-firing bass reflex port, tuned to 36.5 Hz. The port is positioned at the cabinet base to use floor boundary reinforcement in extending low-frequency loading โ and to keep port turbulence, and the noise it generates at elevated output levels, away from the primary listening axis. Internal port geometry is developed to minimise flow-induced noise across the X1's dynamic range.
Structural integrity
Resonance-controlled enclosure
High-density natural wood composite construction, internally braced at positions calculated to break the primary panel resonance modes. The material is moisture-resistant and dimensionally stable โ the cabinet maintains its acoustic geometry over decades of use. A loudspeaker built to last a generation must perform like one throughout.
Technical specifications
Measured. Specified. Stated without qualification.
Acoustic Performance
Physical
Amplifier pairing.
At 88 dB sensitivity and 4 ฮฉ nominal impedance, the X1 is designed for a capable solid-state amplifier with stable current delivery into low-impedance loads. It is not optimised for low-power SET or OTL topologies. A minimum of 50 W into 4 ฮฉ, with a damping factor above 50, is recommended. Our team is available to advise on specific pairings before purchase.
System context
Stereo. Cinema. Resolved equally.
The X1 is designed for two distinct contexts โ and performs in both without compromise. As a primary stereo pair, its imaging precision, phase coherence, and controlled directivity create a soundstage of uncommon stability and depth. As the front left/right anchor of a high-performance home cinema system, those same properties become the foundation of a cinematic experience that does not ask the listener to accept a different standard for music and for film.
For full X-Series system deployment, the X1 pairs with the X4 Center Channel, X5 or X7 Surround, X6 Atmos, and the C-Series or D-Series subwoofers. Every model in the X-Series shares the same TeXtremeยฎ driver platform and finishing standard, ensuring tonal consistency throughout the system.
For full X-Series system deployment, the X1 pairs with the X4 Center Channel, X5 or X7 Surround, X6 Atmos, and the C-Series or D-Series subwoofers. Every model in the X-Series shares the same TeXtremeยฎ driver platform and finishing standard, ensuring tonal consistency throughout the system.
Ownership
Built for decades. Backed without conditions.
Home trial
60 days in your room
The only meaningful audition is in your own space, on your own system. The X1 arrives at your door. You listen. If after 60 days it does not belong in that room, contact us and we arrange collection. No restocking fee. No conditions. No questions that require an answer.
Warranty
Ten years. Transferable.
Full parts and labour coverage for ten years from the date of purchase. The warranty transfers to subsequent owners on private resale โ register the new owner and full coverage continues. We build loudspeakers intended to last a generation. The warranty reflects that intention.
Support
Direct to the engineers
V&Y concierge support connects you directly to the people who designed the X1 โ for setup, room placement, amplifier pairing, and long-term system guidance. No call centres. No support tickets. The person who answers understands the speaker from the inside.
Direct to customer
No intermediaries. Ever.
V&Y sells exclusively direct. No importers, no dealers, no showrooms. The price you see is the price you pay โ worldwide shipping and all applicable duties and taxes included. Every element of the customer relationship remains with us, from order to ownership.
Finish options
Five finishes. All hand-applied. All to specification.
Each finish is applied in controlled stages. Coats are flat-sanded between applications. Every surface is inspected under raking light before the next layer is added. The cabinet clears our facility only when it meets a written surface specification โ not a visual judgment, a documented standard.
Custom RAL colours available on request for orders of two pairs or more. Lead time 8โ10 weeks. Contact us to discuss.
The X-Series
A complete acoustic platform.
The X1 is the foundation of a scalable system. Every X-Series model โ bookshelf, floorstanding, center, surround, atmos โ shares the same TeXtremeยฎ driver platform, the same cabinet finishing standard, and the same crossover design discipline. Build a stereo pair. Extend to a full reference cinema system when the room calls for it. The acoustic character of the X1 is present throughout.
Shipping & Delivery