C18d
Cinema Subwoofer
Cinema 18 Dual
The C18d delivers 134dB peak SPL at one metre — 9dB above the C18s — with two 600W amplifier channels. At this output level, it competes directly with Procella’s reference P18 for mid-to-large dedicated cinema rooms of 3,500 to 8,000 cubic feet, as a passive unit giving integrators complete control over amplification and DSP.
$5,977.61
worldwide shipping · duties included
60-day home trial · 10-year warranty · Hand-finished · Limited production · Direct to customer
Q3
3-Way Floorstanding Loudspeaker
When a room demands more than a single driver can deliver, the C18d answers with twice the architecture — and not a millimetre of additional depth.
Two drivers.
One cabinet depth.
This is not a coincidence of geometry — it is a deliberate design constraint. V&Y specified the cabinet envelope first, then engineered the internal architecture to meet it. The C18d and C18s are visually interchangeable in any installation; only the height tells them apart.
What changes — and what does not
Width: 620mm — identical
Same baffle template · Same CNC tooling · Same polished aluminium face
Depth: 300mm — identical
Same motor clearance · Same panel stack · Same installation depth
Height: 980mm — the only difference
Both drivers stacked vertically · 480mm center-to-center · 490mm structural brace between
+9 dB acoustic output
Dual coupling adds 6dB sensitivity · Each driver amplified independently · 2× amplifier channels
SEALED
CHAMBER
One shared
acoustic chamber.
A single 30mm cross-brace between the two driver positions — with a 180mm airway to allow full pressure coupling — stiffens the tall cabinet against panel resonance without disrupting the shared acoustic space.
134 dB.
Reference cinema.
134dB
Peak SPL at 2×600W / 1m
~21Hz
In-room -3dB extension
+9dB
Above C18s at equal power
112L
Total shared acoustic volume
0.59
Qtc — geometry-matched
300mm
Cabinet depth — same as C18s
Matched driver pairs — same production batch
Both 18″ neodymium transducers in every C18d are drawn from the same production batch. Mismatched resonant frequencies or compliance values in a shared sealed chamber produce asymmetric loading — one driver working against a different air spring than the other. V&Y specifies batch matching as a production requirement, not a preference.
Dual independent amplification
The C18d presents two independent 8Ω binding post pairs — one per driver. The integrator drives each transducer from a dedicated amplifier channel. This eliminates inter-driver impedance interaction and allows channel-level gain trimming for room-specific acoustic optimisation.
Integrator amplifier freedom
As a passive unit, the C18d accepts any professional amplifier the integrator specifies — Datasat, Trinnov Amplitude, Crown, Lab.gruppen. The V&Y Cinema Amplifier (Phase 2) adds factory DSP voicing and app control when it becomes available, as a drop-in upgrade to the existing passive installation.
Two drivers.
One philosophy.
Identical baffle template
The C18d and C18s share the same 620mm-wide CNC aluminium front baffle specification — same alloy, same thickness, same polish process, same V&Y identity mark. The baffle CNC program differs only in height. Both products are visually indistinguishable at the same viewing distance.
30mm Medite Premier MDF
High-density moisture-resistant MDF throughout. All panel joints glued, hardwood-dowelled, and sealed with neutral-cure silicone. At 980mm cabinet height, the tall side panels carry greater acoustic loading — the 30mm specification was not reduced to save material.
Phase 2 active upgrade path
The rear panel includes a factory-installed provision for a dual-channel Hypex-based plate amplifier — four M6 threaded inserts at the plate mounting corners, covered by a piano black aluminium blanking plate in Phase 1. When the V&Y Cinema Amplifier launches, the passive C18d upgrades in place without cabinet modification.
C18d
Acoustic Performance
Frequency response (−3dB, free-air)
34 Hz
Frequency response (−3dB, in-room)
~21 Hz
System Q (Qtc)
0.59
Peak SPL at 1m (600W)
134 dB
Effective sensitivity (dual coupling)
103 dB / 1W / 1m
Nominal impedance per driver
8 Ω (2 independent channels)
Sensitivity
97 dB / 1W / 1m
Recommended amplifier power
2× 400–800W at 8Ω
Amplifier configuration
Stereo bi-amp — one channel per driver
Physical
External dimensions (W × H × D)
620 × 980 × 300 mm
Isolation feet
6× M8 adjustable spiked
Alignment
Sealed — single shared chamber — passive
Net weight per cabinet
~99 kg
Cabinet material
High-density natural wood composite
Front baffle
20mm 6082-T6 aluminium — identical to C18s
Connections
2× independent 5-way gold binding post pairs
Production
Limited batch
Lead time
4–5 weeks from order
Your amplifier.
Your DSP.
Your room.
Built for decades. Backed without conditions.
60 days in your room
The only meaningful audition is in your own space, on your own system. The X1 arrives at your door. You listen. If after 60 days it does not belong in that room, contact us and we arrange collection. No restocking fee. No conditions. No questions that require an answer.
Ten years. Transferable.
Full parts and labour coverage for ten years from the date of purchase. The warranty transfers to subsequent owners on private resale — register the new owner and full coverage continues. We build loudspeakers intended to last a generation. The warranty reflects that intention.
Direct to the engineers
V&Y concierge support connects you directly to the people who designed the X1 — for setup, room placement, amplifier pairing, and long-term system guidance. No call centres. No support tickets. The person who answers understands the speaker from the inside.
No intermediaries. Ever.
V&Y sells exclusively direct. No importers, no dealers, no showrooms. The price you see is the price you pay — worldwide shipping and all applicable duties and taxes included. Every element of the customer relationship remains with us, from order to ownership.
Five finishes. All hand-applied. All to specification.
Obsidian
Piano Black
Chalk
Gloss White
Celestite
Metallic Silver
Midnight
Metallic Gunmetal
Custom RAL colours available on request for orders of two pairs or more. Lead time 8–10 weeks. Contact us to discuss.
